restoring a 2000 XC300
 

Trying to bring a basket case XC300 back to life.
The 10th # in the VIN is 0 so I'm assuming its a 2000.
Please correct me if im wrong.
I need a rear fender preferably one without the tail light.
shift lever and brake lever.
Having a hard time finding anything for this bike.
where can I get this stuff?

Halls cycle 12177890107 just got a rear finder think it was $35 shifters you can find on ebay

2000 era XC300's use 1998-ish KX250 bodywork, so a rear fender in lots of varying colors shouldn't be too hard to find. I believe that side panels are same era KX250, the only difference in my memory is that the XC300 has an air filter access panel on the left side and the KX doesn't have the little access panel.

What part of the country (World) are you in?
I likely have some used plastics, but, finding a box and shipping
might be more of a hassle than the parts are worth.

Thanks for all the info guys.
Good to know about the KX part interchange. Can only find black and green KX fenders. I'd really like a blue one.
Im located in upstate NY

Call Halls......m

The access panel was added in '01. All KX250 plastic except radiator shrouds which are GG only.

mine has the access panel.
Do I have the year correct?
Again the 10th # in the VIN is zero.
Is that how ya tell?

2000 model year should be correct but if someone updated the plastics to a newer year to get rid of the "pink" red '00 plastics (like I did to mine) then the airbox got changed also, that's probably why you have the side air filter access panel. Check the sticky threads in the general discussion forum, lots of info there. Also the main page has some "parts crossover" tab with even more info but you don't seem to be able to get there from here. Here's the link http://gasgasrider.org

still cant find cross over parts for shift and brake lever and hand levers.