Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   2013 EC300 temp sensor (http://www.gasgasrider.org/forum/showthread.php?t=13917)

skidmarx 12-16-2012 01:01 PM

2013 EC300 temp sensor
 
Just had the new bike delivered and have started the break in routine. Supprised to find that there isn't a temp sensor in the cooling system. Anyone know if they exist? The Dash has the capability to read one, so seams worthwhile to get one if available. My 2005 bike came with one fitted and I relyed on it to let me know when she was good to go.

Cheers

Skids

noobi 12-16-2012 10:54 PM

Quote:

Originally Posted by skidmarx (Post 101203)
Just had the new bike delivered and have started the break in routine. Supprised to find that there isn't a temp sensor in the cooling system. Anyone know if they exist? The Dash has the capability to read one, so seams worthwhile to get one if available. My 2005 bike came with one fitted and I relyed on it to let me know when she was good to go.

Cheers

Skids

I don't know if it was a stock part, as the bikes never really had a need for one.
As the dash is a rebranded TrailTech unit, I would say the inline radiator sensor http://www.trailtech.net/7500-3050.html would be the best bet.

skidmarx 12-17-2012 01:29 PM

Magic, just what I needed to know. Just got to find a trail tech wiring diagram to find out where to plug it in.

Thanks Noobi

Simmo737 12-17-2012 03:48 PM

I put a trail tech temp sensor on my 2011, it's a no brainier with the connection, there is only one plug hanging out the back of the unit that will accept the sensors plug, you can set two warning light temps in the setup pages ( same as a vapour, download the manual from the tt site) and you get a engine temp and outside air temp as you scroll through the pages, plus the two warning lights.

Hope that helps. Cheers.

skidmarx 12-18-2012 11:53 AM

Thanks Guys, have ordered one, hopefully it'll be here before the weekend.

Skids.:)

Simmo737 12-18-2012 05:31 PM

Ps, the temp doesn't read till 40 degrees c ( 104 f) or close to that so give it time, at first if you don't know that it looks like it ain't workin.

skidmarx 12-18-2012 06:36 PM

Quote:

Originally Posted by Simmo737 (Post 101351)
Ps, the temp doesn't read till 40 degrees c ( 104 f) or close to that so give it time, at first if you don't know that it looks like it ain't workin.

Cheers for the reminder, the old bike dialed in at 38 Dc with a Vapor dash. I guessed they would be the same.

Skids

eviljim 02-23-2013 04:00 PM

I have a sensor not fitted, I was was thinking about putting it on but thought it may introduce another point of failure.
Am I paranoid.

Moto7man 02-24-2013 12:13 AM

My Trailtech Voyager came with the temp sensor. It was super easy to install and reads from 0 degrees. I have never had a leak or problem with it. Very handy in making sure your bike is warmed up and knowing if your bike is overheating.

twowheels 02-24-2013 12:29 AM

Quote:

Originally Posted by skidmarx (Post 101203)
Just had the new bike delivered and have started the break in routine. Supprised to find that there isn't a temp sensor in the cooling system. Anyone know if they exist? The Dash has the capability to read one, so seams worthwhile to get one if available. My 2005 bike came with one fitted and I relyed on it to let me know when she was good to go.

Cheers

Skids

There is however a thermostat in the right hand rad line, so warm-up is quick and easy. I tend to lay my hand on the back of the cylinder when I'm closing the choke. If it's warm to the touch you're good to go.


All times are GMT -5. The time now is 01:26 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org