36mm Carb Jetting
 

I have a 2005 250EC. what would be a good starting place to jet with a 36mm PWK?

Thank you,

John

Why are you going to a smaller carb than the 38mm stocker?
What slide is in the carb?
What temperature and elevation?
What needle do you like?

I like the Suzuki needles NExx series and the Honda 1370 DKA series too, because they give a linear increase in power and not as much of a hit.

The 36 has been supplied on 250s and 300s on various years. 36 works well on a 250.

maybe the better question to ask is: what is the baseline jetting for a 36mm?