float level
 

https://i.postimg.cc/2VZ8t1CP/DSCF7133.jpg
https://i.postimg.cc/sBVj1K5r/DSCF7132.jpg
https://i.postimg.cc/mc8b9MSF/DSCF7130.jpg
https://i.postimg.cc/BtynNTfT/DSCF7131.jpg
https://i.postimg.cc/CRpLpw1d/DSCF7135.jpg

Setting fuel level.

Well the carb has always been a pain, sometimes it leaked sometimes it was
fine. Put in a new valve ,polished the seat etc.

Anyway seeing as I got time on my hands I thought I'd try this.

Set the bike upright using an app on the phone, got a small bit of wood and measured the inlet angle. Angle is 21 deg there about.

Set the adjustable angle plate level in the vice and then angle to 21 deg.

Although you can't see it very well fuel level is level with float body / float bowl line.

Doesn't drip at this setting.

Measured the side stand angle at 17 deg, set the carb at 17 deg and after a while it drips !!!

Will readjust and see what happens