'05 EC300 Keeps blowing bulbs
About a year and a half ago I swapped ignitions from a 2K-2 to a 2K-3 and I haven't been able to keep headlight and tail light bulbs from blowing after only a few seconds. What would cause this? The voltage regulator or might it have something to due w/ the swap?
|
Voltage regulator would be my guess. A quick probe with the multi meter should tell at least part of the story.
|
Quote:
|
What wire did you use to power your lights? Make sure it's the yellow wire and NOT the white wire. The voltage regulator should be connected to your yellow stator output wire.
The white wire is what you want only if you have a voltage rectifier (which is actually a combined voltage rectifier/regulator in one housing). |
It's the regulator I just went through this a year back
|
Alright. I'll make sure it's the correct wire and see how many volts I'm getting. I'll post back if I have any additional questions. I appreciate your help.
|
All times are GMT -5. The time now is 03:00 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org