Rieju & GasGas Legacy Riders Club Forum - 400fse-450fse Starter gear and one way clutch mod

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Engine 4 stroke (including EFI & Exhaust) (http://www.gasgasrider.org/forum/forumdisplay.php?f=45)

- - 400fse-450fse Starter gear and one way clutch mod (http://www.gasgasrider.org/forum/showthread.php?t=18583)

krolik_21

11-21-2014 11:40 AM

400fse-450fse Starter gear and one way clutch mod

4 Attachment(s)

Hi. I made new starter gear and one way clutch bearing to my Gas Gas 450 fse 2003.

For modification I used:
Yamaha Majesty 400 starter gear- cut new gear teeth on CNC milling machine
Suzuki DRZ one way clutch bearing
GasGas original bearing race-original size inside 62mm -drill to size 62,20mm and drill a small groove deep 2mm

krolik_21

03-20-2015 02:41 AM

If anyone have damaged starter clutch to 400-450 fse I can rebuild from your parts to fit drz 400 one way bearing. Total cost for starter gear, one way bearing and outside sleeve is 100 euro. To do this i need yours damaged starter gear and one way bearing sleeve.

stay_upright

08-23-2018 05:59 AM

Is a replacement part from GG very expensive?

Adam_redneck

10-27-2018 09:10 PM

Yes I got quoted over $200USD.

Rasmus

08-22-2019 12:18 PM

Krolik_21 I would like too but a kit from you, please contact me.

Harry

08-22-2019 05:58 PM

Well done Krolik. I like the the way you solve problems.

All times are GMT -5. The time now is 01:57 PM.