Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Intake/Carburetion - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=15)
-   -   needles (http://www.gasgasrider.org/forum/showthread.php?t=2359)

moff747 03-09-2008 04:03 PM

needles
 
Hi, I have the following needles N1ED N1EE N1EF and N1EF. Does anyone know the main vairiation between these needles, Im looking for good low to mid power.

kim 03-09-2008 06:38 PM

You can find all the info here

http://www.keihin-us.com/am/tuning/

Kim

stay_upright 07-08-2008 06:12 AM

Doesn't seem to cover our e.g N1EF needles - or not that I can find or understand...

stay_upright 07-09-2008 08:07 AM

From a post on KTM Talk

"I hope you can help me .Do you know the difference between ( N0Z )series and ( N1E )series carb.needles?
I was told that the triple tapers and the strait dia. are the same for the same letter.
(example n1ee is the same as n0ze) The difference is the clip grooves are shifted 1/2 mm.

You're good on everything but that. The N1Ex is 1/2 clip position richer than N0Zx.
Don't be afraid to try these needles in pos #2 or even #1 for the N1Ex."





And as I remember the NOZ needles were leaner with a higher number at the end and that number corresponds to the straight diameter i.e. low throttle openings.

For example N1EG is leaner at low throttle openings than N1EF.

See also my post on my needle spreadsheet will show you a NOZI needle so the shape of the N1Ex should be similar.

moff747 07-09-2008 04:43 PM

Thanks for the help, am about to try the ltr neddle hopefully this will suit my riding. I have'nt got on with the N1E.. neddles so far.


All times are GMT -5. The time now is 09:15 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org