Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   General Discussions & Announcements (http://www.gasgasrider.org/forum/forumdisplay.php?f=7)
-   -   ec250 2003 compression test readings (http://www.gasgasrider.org/forum/showthread.php?t=5052)

gasgasquebec 08-05-2009 08:52 AM

ec250 2003 compression test readings
 
Hi everybody. My first steps here... I did a quick search but...

I took the motor compression on my gasgas ec250 2003.Motor was cold, throttle WOT, and engine stop switch pushed. 5 kicks.

I got 170psi (cold) (twice)



Compressions tests do not tell the whole story but just wondering what you guys think and what are the service limit values.

Thanks a lot

I got a little spare time today and trying to find something to do on the bike haha

phil.

GMP 08-05-2009 11:23 AM

Kick it fast until the gauge reading stops climbing, maybe more than 5 kicks. Depending on how the squish is set up and the hours on the motor, as well as the gauge itself, 170 may not be bad. 195 - 200 is about tops for pump gas.


All times are GMT -5. The time now is 01:28 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org