Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   2011 ec300 rectifier (http://www.gasgasrider.org/forum/showthread.php?t=22889)

jeremy358 08-21-2017 12:14 PM

2011 ec300 rectifier
 
Hello. I had two out of the four wires pull out of the plastic 4 pin connector that plugs into the rectifier. I don't want to mix them up and chance shorting the cdi. Can anyone tell me the order of the wires?! Thank you!! 2011 ec300

Right now I have -red wire/black stripe (on the one end)
-next is white wire
-yellow wire/green stripe. (Pulled out of connector)
-yellow wire. (Pulled out of connector)

Thanks!!!

Neil E. 08-21-2017 02:56 PM

I can pull my sidecover and have a look, just not right away. How quickly do you need to know?

Neil E. 08-21-2017 07:41 PM

1 Attachment(s)
Red/black
White
Yellow/Green
Yellow

Note their position relative to the latch and you should have no trouble (just in case your rectifier is turned around or on a different angle).

jeremy358 08-22-2017 12:57 AM

Perfect! Thanks so much!


All times are GMT -5. The time now is 03:59 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org