Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Chassis & Body (http://www.gasgasrider.org/forum/forumdisplay.php?f=20)
-   -   Chain slider (http://www.gasgasrider.org/forum/showthread.php?t=12435)

gassergrant 05-16-2012 01:10 PM

Chain slider
 
Hi gent GG uk dont have any in stock, does any other bike use one that's the same

Simmo737 05-16-2012 03:54 PM

Gday

Tm design works make sliders and guides for gassers

Cheers

Jakobi 05-16-2012 06:46 PM

They're nice too! I just put a set on my 2010. They cost a pretty penny which is the only downer. I believe BRP makes them too (http://www.brpmoto.com/products?page...ategory_id=307) however looking at the site I only see a guide and no sliders listed.

noobi 05-16-2012 07:16 PM

Quote:

Originally Posted by gassergrant (Post 86751)
Hi gent GG uk dont have any in stock, does any other bike use one that's the same

Which part are you after the slider round the front of the swingarm or the guide next to the rear sprocket??

Heres the stock slider http://www.teuber-motorsport.de/cata...ducts_id=50755 or the TMD alternative http://www.teuber-motorsport.de/cata...ducts_id=51940
The stock chain guide sucks, and I recommend either the TM designworks or the BRP like Jakobi stated.

bowhunter007 05-16-2012 07:23 PM

The chain guide on my '01 300 had been replaced with custom bracket. It accepts a Honda CR250 guide.
Quote:

Originally Posted by noobi (Post 86782)
Which part are you after the slider round the front of the swingarm or the guide next to the rear sprocket??

Heres the stock slider http://www.teuber-motorsport.de/cata...ducts_id=50755 or the TMD alternative http://www.teuber-motorsport.de/cata...ducts_id=51940
The stock chain guide sucks, and I recommend either the TM designworks or the BRP like Jakobi stated.


QLDggMuppet 02-17-2020 12:28 AM

Quote:

Originally Posted by Jakobi (Post 86776)
I believe BRP makes them too (http://www.brpmoto.com/products?page...ategory_id=307) however looking at the site I only see a guide and no sliders listed.

Now Feb. 2020, and just checked BRP, No chain slider, dammit.


EC300 2007 - in desperate need of a chain slider

(F5) 02-17-2020 02:25 AM

So next week my mini project is to make a new bracket to hold a generic slider, probably *onda CRF or something that I picked up cheap to the swing arm of my 07.

QLDggMuppet 02-17-2020 04:34 PM

Quote:

Originally Posted by (F5) (Post 193904)
So next week my mini project is to make a new bracket to hold a generic slider, .

I've had similar thoughts instead of the hard find, shouldnt be too hard, I guess hardest part is which one to use from hundreds ? I wonder if local shop will let me loose in spare parts dept. , yeah cant see that happening!

shawbagga 02-17-2020 09:18 PM

https://www.ebay.com.au/itm/TM-Desig...AAAOSw5eNeKU7v

(F5) 02-18-2020 01:47 AM

My comment above to be clear, was for a rear guide, got a bit of a confusal on. Put the bike on the bench, so I'm getting closer.


All times are GMT -5. The time now is 07:22 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org