Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Chassis & Body (http://www.gasgasrider.org/forum/forumdisplay.php?f=20)
-   -   rear caliper carrier (http://www.gasgasrider.org/forum/showthread.php?t=12901)

bonkeye 07-24-2012 03:02 PM

rear caliper carrier
 
my rear caliper carrer is worn.... ive fitted new pins but there is still loads of play, i cant find a GasGas carrier forsale unless i buy new but i do not have the funds for that so could i make one fit from another bike? say honda etc?

bowhunter007 07-24-2012 06:12 PM

Quote:

Originally Posted by bonkeye (Post 91295)
my rear caliper carrer is worn.... ive fitted new pins but there is still loads of play, i cant find a GasGas carrier forsale unless i buy new but i do not have the funds for that so could i make one fit from another bike? say honda etc?

I don't see anywhere, year, model, etc.

GasGas 07-24-2012 06:52 PM

Where is the play?

bonkeye 07-25-2012 12:54 AM

sorry i have a 2000 mofel 300ec

the play is in the hole the large pin goes into

GMP 07-25-2012 09:01 AM

If you buy anything buy an EE with integated sharkfin. Besides that, if funds are low, take it to a machine shop and have them bore the worn hole and press a bushing in. We did this to my brother's Husky carrier, worked great.

Cruiser 07-25-2012 03:56 PM

Send me a picture of what you have,, I may have one.. cruiser1911@me.com

Fred1956 07-25-2012 04:09 PM

carrier
 
1 Attachment(s)
Like this? Has part # BE250022120 on the casting, that # fits a 2001 per gofaster fiche but I don't know about the 2000, it has approximately 8.95mm pin hole It has a rub mark from the rotor?? on the inside edge but shouldn't be an issue. Where you located?

bonkeye 07-25-2012 04:25 PM

im in the UK (united kingdom) reason why ive never asked in the wanted section as 99% of this forum is in the USA, the carrier on a 2000 is also BE250022120 but ive just found one in a salvage yard but its off a 2004 450 FSE but according to the manuals they are the same part number

Fred1956 07-25-2012 06:19 PM

Good deal ! It'll have the # on the casting just check before you buy. Good Luck!

gregorythomas 07-28-2013 07:43 AM

Rear Caliper Carrier
 
Don't know if anyone reads these old threads but I have the same worn bore on my 2001 EC250 caliper carrier. Took it to the machine shop on Martha's Vineyard to be bored out and sleeved. Am hoping to get it back Monday to see how it works out. My brake pads were wearing out quickly from dragging due to the caliper not being able to float well.


All times are GMT -5. The time now is 05:16 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org