Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Chassis & Body (http://www.gasgasrider.org/forum/forumdisplay.php?f=20)
-   -   Rear master cylinder sleeve (http://www.gasgasrider.org/forum/showthread.php?t=24568)

(F5) 06-29-2019 04:33 AM

Rear master cylinder sleeve
 
Ok so my 2007 I replaced the front MC with great results. They are only ally and get a hard time on the dirt.

The rear I've tried to find replacement to no avail. They are different bore and mounting to most other bikes.

Took it apart and could see where the bore was not smooth.

Local place offered brake sleeving for cars with stainless sleeve. They would do mine . When they got it it was a bit tricky due to remote reservoir and ball bearings blocking off side drillings. Got there in the end.

Bled it in 10 seconds. Really. Wrapt.


All times are GMT -5. The time now is 03:12 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org