Homemade radiator braces?
Hello to greatly respected society :)
I plan to make my personal radiator protection, for two reasons - to save money - because I like doing things by myself So, can someone be able to measure their protection, and give me the dimensions? ec300 2011 Here is one of my friend made for his husky http://i.piccy.info/i9/dc29bb26e54c8..._TCMHY_500.jpghttp://i.piccy.info/a3/2017-05-08-07...54x472-r/i.gif http://i.piccy.info/i9/42db018c2779b...cjbi38_500.jpghttp://i.piccy.info/a3/2017-05-08-07...54x472-r/i.gif http://i.piccy.info/i9/1229176178b32...pqJkSc_500.jpghttp://i.piccy.info/a3/2017-05-08-07...72x354-r/i.gif http://i.piccy.info/i9/71f85f10df9da...vnxn_o_500.jpghttp://i.piccy.info/a3/2017-05-08-07...54x472-r/i.gif |
The OEM that came on my six days 2011
https://goo.gl/photos/FoH3H6SWHhqRMoJn8 Didn't have the bike anymore |
well done I like home made parts, they look nice and strong.
|
so here what i'v made
http://i.piccy.info/i9/cea331cc62343...184956_500.jpghttp://i.piccy.info/a3/2018-04-01-18...54x472-r/i.gif http://i.piccy.info/i9/40bd5a4475382...185142_500.jpghttp://i.piccy.info/a3/2018-04-01-18...54x472-r/i.gif http://i.piccy.info/i9/b0ffbbbe068fa...185002_500.jpghttp://i.piccy.info/a3/2018-04-01-18...54x472-r/i.gif http://i.piccy.info/i9/21bcae998d106...185010_500.jpghttp://i.piccy.info/a3/2018-04-01-18...54x472-r/i.gif http://i.piccy.info/i9/6a79c117b9c1d...185018_500.jpghttp://i.piccy.info/a3/2018-04-01-18...54x472-r/i.gif now it's more accurate than on photo. Cost me maybe 20 bucks and two lightdays |
Those don't look too bad, good job!:)
|
Making your own is smart.
They aren't that much fun to mount to the bike aftermarket. I've never had a set just bolt right on and walk away. Its always a pita to get them to fit right and they aren't cheap or particularly built well. |
Very nice. I made and used some on my gasgas bikes for years, much more primitive than what you have made. Two features of mine that I really liked were, I made a rod that ran from the outside of one side all the way to the outside of the other side. I also triangulated the brace to run back to the frame, eventually I even had tabs welded to the frame to bolt them to.
|
All times are GMT -5. The time now is 02:04 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org