GasGas Riders Club Forum

GasGas Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)
-   -   Clutch springs (http://www.gasgasrider.org/forum/showthread.php?t=9361)

jdosher 03-31-2011 02:04 PM

Clutch springs
 
Does anyone know of clutch springs that have a lower spring constant (or are shorter) than the stock Gas Gas clutch springs? Possibly 06 YZ250F?

I've recently put a Revloc Dyna Ring into my 09 EC300. Part of the dyna ring install is to add a number of shims/thrust washers on top of the needle plate to push the pressure plate out and create a gap. All told, the springs get compressed about 2mm from stock, and this has caused the clutch to lose its nice, light pull.

-Jesse


All times are GMT -5. The time now is 07:11 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org