'05 450 FSE Adige APTC Clutch Service...
 

Hello GG Riders,

Please look over the attached document for servicing the clutch on '05 450 FSE.

NOTE: the 450 does not have the anti-juddering system. All plate thicknesses are to be the same. Adige recommends using manufacture spec oil viscosity in the motorcycle.

roberto.morone@adler.it has been very helpful in answering questions in a timely response.

Matto Cycles has a good supply of gaskets and can get most parts.

Hope this helps anyone else out there.

Sorry, attached document here.

Still no document... :)

The document is rather large w pictures. I'm inquiring with Adige for a link to the pdf. I can alway e-mail directly to anyone wanting the document.

I dont have that type of clutch but i can upload the document to my GoogleDrive for others :) PM me and i'll give you my email :)

Hi, Having trouble with my 2005 Adige clutch, could you send me any info you have on the clutch. I'm not sure what the clutch stack height should be and not getting enough separation from the plates for an unloaded clutch. Thanks Gerry email:vandammn6@aol.com