GasGas Riders Club Forum

GasGas Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)
-   -   Cylinder Bleeder nipples (http://www.gasgasrider.org/forum/showthread.php?t=11081)

PEB 11-22-2011 06:31 PM

Cylinder Bleeder nipples
 
I am putting the finishing touches on a rebuild for a friend. One of the bleeder nipples he took off the jug is sealed. It looks like it came this way from the factory. Any idea which side it goes on? Any reason to not drill it out?

gasgasman 11-22-2011 07:14 PM

They are not really bleeders.

The one that is "plugged" goes on the power valve side. There is actually a calibrated hole in the center of that fitting. Take a small wire and clean it out.

The fitting with the drilled out center, goes on the right side on top of the power valve actuator.

PEB 11-22-2011 07:23 PM

I wish I could buy you a frosty beverage GASGASMAN


All times are GMT -5. The time now is 11:54 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org