12' clutch cover on 11' ?
I took the metal clutch cover off my 11' 300 to replace the leaky POS plastic one on my 12' 300.
The plastic 12' cover has a molded nipple that hits the clutch push rod when I tried to fit it up to the 11'. Can I grind off that nipple and still be able to use it back on the 12'? I was going to try to slap it back together for some track time this weekend since the 12' is 3hrs away |
Quote:
Sent fra min E5603 via Tapatalk |
Anyone tried the metal 2014 cover on the 2010/11 bikes
|
I put a '14 or '15 cover on my '13. It fit but I did have to grind the casting in the center down. Haven't had any problems after a season of riding.
|
That's a bummer... the casting that directs oil into the centre of the clutch was the reason I bought it and the additional volume
|
All times are GMT -5. The time now is 05:41 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org