Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)

- - Float Bowl HELP! (http://www.gasgasrider.org/forum/showthread.php?t=1279)

gasIdaho

07-18-2007 07:21 PM

Float Bowl HELP!

I was taking my float bowl off to re-jet and my float came off with it as well as the pin and the other part(plunger?). This has never happened so I never paid much attention to how the assembly hooked up.

My question is how to re-attach this other part which I'm assuming regulates the gas flow into the carb. Does it just slide over the metal tab on the float assembly?

eff	07-18-2007 07:33 PM

Yes. The loop on top of the plunger just slides onto the tab on the float.

RBD	07-18-2007 09:26 PM

Quote:

Originally Posted by eff (Post 7121)

Yes. The loop on top of the plunger just slides onto the tab on the float.

Yes, and with the two little wire ears pointed away from the pivot pin :)

Ron

gasIdaho

07-18-2007 09:30 PM

Yep. Got her up and running. Classic situation. Good tunes and distilled liquids flowing. Pull off the float bowl, parts fall off and slide down into countershaft and linkage nooks. Good times......:D

All times are GMT -5. The time now is 02:43 AM.