New 2018 300
deleted by me
|
Very Nice bike! Good to here they are starting off on the right foot with the new model. There seems to be a rush on Beta's around here lately. I'm on a Sherco and have ridden a few Beta's and don't see the what all the hoopla is about with that brand. Nice views too btw!
|
Nice bike! Thanks for sharing the info!
|
How are the engine vibrations? I've never rode a 300 so I've only read about some 300's vibrating a lot. My 200 doesn't vibrate much.
|
Quote:
|
Quote:
His website is at www.lt-racing.com jeff |
We have just posted Rad Guards and Shark fins on our web site for that bike. Anything I can help you with please let us know. Thanks
http://www.gasgaspartsguy.com/GASGAS...&shopBy=-35993 http://www.gasgaspartsguy.com/GAS-GA...talogId=-15678 |
Quote:
need heavier springs front and rear.. got a line on those? |
Mark get that bike all dialed in and then we will go on a ride to deburr it properly.
|
Quote:
|
Quote:
http://www.gasgaspartsguy.com/browse.htm?shopBy=-35997 |
Quote:
|
so odd.. I've never seen spring rates go up by 3's like on the rear shock on the site. I have the fronts in my cart. The owners manual says I need 54 in the rear. I don't see that on your site. Do you not sell the 54?
|
Quote:
Thanks, BUDD |
Quote:
|
Budd is 2nd to none when it comes to customer service and his suspension work is astonishing. He revalved my 2015 and it's a whole new bike. I am a heavy rider too (260) and I find that springs heavy enough to hold me up tend to make the damping a little wonky. Once you get your big boy springs in, if your still not happy I highly suggest you send it to Budd and let him work his magic. Pricing is half of Stilwell and the other over priced high end shops too.
Sent from my iPhone using Tapatalk |
Couldn't wait. Picked up a xc300!
|
Hi Markwoodlief
Hope you're enjoying your new bike. :) How's the bike jetting feel straight from the factory? Can you tell me (or anyone else) the standard carb settings? Pilot Jet? Needle? Slide no.? Main Jet? Thanks, Dave. |
1 Attachment(s)
OK, just downloaded the 2018 manual and found it actually lists the carb setup. :)
Pilot Jet 42 Needle N1EF Slide no. 7 Main Jet 175 Still interested to know how it feels? Thanks, Dave. |
2018 Gasser gp300
Road a 2018 gasser ec300, xc300 and a husq tx300. The tx is an awesome bike no doubt and gas gas has become a modern bike to be reckoned with.
Im looking for a bike to ride offroad and make some adjustments and ride track. The husqy did great off road but i wasn't quite able to get it hard enough for the track. Gasser with the new kyb setup i was able to bounce the rocks on trail and a few clicks and i had a decent track ride. I'm a 175 lb averge rider and have riden dirt all my life ..50+ I had one other gasser, 2011 ec300 that had kyb retro forks. What a great handling and riding setup. I was going to get the husqy but then gasser made all these great changes and what a ride. Way better than the 2011 with the same great tractor pulling motor. A very balance bike that corners well and doesnt knife under. The hard part was to ec or xc....then i decide to get xc and add lights. But wait....then i found out there is the gp300 that brings both together with a really trick triple clamp with many other options that are awesome and fashioned after their race bike. Also there are only 50 coming in the US. Should be great resale market on them. The final nit for me was when i was on the husky i felt like i had put on a nice glove that fit well. When i ride the Gasser i feel like i had put on that glove that was a good friend i had broken in and had no bad spots. So i decided to ride the friend that HAD all the RIGHT STUFF. Awaiting order. More to come........ Colt Ake! Kia Kaha |
Gp300
3 Attachment(s)
The wait is over and worth it. I have recieved my GP300 and it is awesome. What an awesome bike. I found out that the 50 GPs coming into the US is 38 300s and 12 250s so i feel really fortunate to have one. Pics attached. I know that this dealer has one more coming soon if you are interested. Dealer is Moto Center in Mesa, AZ, 480.642.6686, motocenteraz.com ask for David.
Happy trails Colt Ake! Kia Kaha |
WOW, that is awesome. Is the color of the red plastic a little brighter than the std models?
Congrats! |
Gp300
Thanks.
And yes it is, but it looks good in person. That was a good catch from a pic. It rides and handles awesome. |
Very very nice
How much are the different models $? |
Quote:
|
Quote:
|
Quote:
|
Ordered my EnduroGP 250 this morning!! :D:D
Can't wait to actually see it!!! There were only 3 250's left in North America, and 5 300's. Now there are only 2 250's. Better move fast if you want one!!! |
Picked up my GP 300 Saturday.. Build quality is insane, and attention to detail is amazing.
https://wadpsg.bn.files.1drv.com/y4m...&cropmode=none |
Quote:
Thanks and enjoy that bikes! |
Quote:
they pretty much loaded it up here. http://www.technical-touch.com/ |
2018 gp300
I got a new 2018 gp300 and love it. I put about 8 hrs on it and then developed some health issues and will need to sell my awesome bike. Only 38 brought into the states so here is one for sell. If u are interested please contact David at Moto Center in mesa, AZ at 4806426686 or email: david@motocenteraz.com. David is the dealer i purchased from and has graciously offered to handle the resale of the bike. It is in his possession and can send pics and handle sale. I will not be responding to this thread so please contact him if interested. Keep riding all u can because u never know when life puts a stop to it. ENJOY!
COLT |
All times are GMT -5. The time now is 10:35 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org