Sachs bleeders ec 300 2008 ?
 

Is possible to find this breeders? Dimension of screw part seams to be so small then others.

+1
Who can tell size of the thread and the other?
EC300 2011

I took my fork caps to an engineering shop and got them to enlarge and tap the holes to kyb specs

Does it means that you can't find bleeders for suchs?

i suspect it will be difficult since the sachs bleed screw is very small so not much space to put a hole through the screw to make bleeders.

it seems they may have changed the forks for 2011, as the description for these mentions that it also fits kyb and showa (which had larger bleed screws than my 2010 sachs)

http://www.motocrosscenter.com/shop/...aign=Doofinder

Looks like here they are

https://ru.aliexpress.com/item/Suspe...6-42d0d852d118

And anyway, i guess it's not big deal to drill bigger hole in cap.

I am pretty sure that the 2010's didn't have m5 bleed screws, i remember them being tiny

2011s also soooooo tiny