Kickstarter Hardware
Kickstarter fell off yesterday :D. Both bolts were gone...that is what I get for not making sure everything is snugged. I got lucky that I had some extra bolts that worked back at the car. However it looks like I lost the following part "18-KICKSTART PEDAL BASE BALL". Any ideas on how I could find one locally? Would a fastener shop have something like this? There must be some size or #?
The bolts and washers should be easy enough to get. http://www.gofasters.com/index.php?m...e10ea2b394fa58 |
it's a ball bearing - probably 1/4" - could be 3/16 or 5/16 i never checked - you might even have one rolling around on the floor somewhere...
|
and there is a spring involved. I did the same thing on mine once in the past :-( But I learned :-)
|
Good point I bet I can find a ball bearing somewhere in the garage that will work. Ya luckily I didn't loose the spring.
|
it's about the size of a .177 bb, maybe a touch larger.
|
Red locktite should be your friend.
Incedently I replaced my old slapper k/s with a yamaha one.What a majic piece of kit,far superiour than the gg article. |
7/32 seems to work well. Loctite is on as well. Now I just have to finish prepping the bike for Sunday.
|
What year Yamaha? I think they changed the spline size (reduced) in 2002.
Quote:
|
All times are GMT -5. The time now is 01:25 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org