Neater crossover thread?
1 Attachment(s)
Just wondering if you guys want to help put together a 'neater' crossover thread. Take screenshots and post images of information depicting crossovers.
I've put this thread in 'chassis' as most parts are going to be chassis, but please move mods if you see fit! Please, no discussion. Please, use images only (links always die eventually!) Front Brake Pad Crossover |
1 Attachment(s)
Rear Brake Pads Crossover
|
1 Attachment(s)
Stator crossover (I know because I have this fitted to my bike), requires chopping of terminals.
from electrex. |
Engine bearings and seals crossover ec300 2006
ITEM BRAND PART No 1 x SMALL END BEARING INA KBK 18x22x22 1 x LHS CRANK BEARING SKF NJ206ECP - C3 62x30x16 http://simplybearings.co.uk/shop/p19...duct_info.html 33.76+ 1 x RHS CRANK BEARING SKF 63/28 - C3 28X68X18 http://simplybearings.co.uk/shop/p14...duct_info.html 1 x LHS CRANK SEAL KOK 20x35x6 - VITON 1 x RHS CRANK SEAL KOK 38x52x7 - VITON 1 x COUNTERSHAFT BEARING SKF 6305 - C3 1 x COUNTERSHAFT SEAL GENERIC 30x40x7 collar - 25x38x17 |
Front brake parts, easier availability from Suzuki -
https://www.fowlersparts.co.uk/parts.../front-caliper |
2011-15 GasGas
Front pads- EBC FA185 Rear Pads- EBC FA367 |
Crossover Brake and Clutch Levers for 2010 EC250?
|
Throttle cable for 2001 through (???) EC 300 is commonly found from the same year KTMs. It is MotionPro part number 10-3000.
Throttle tube for my 2001 EC 300 is MotionPro part number 01-0079 Plastic fork guards crossover with a lot of bikes with WP43 forks. Easiest to look up a 2003 CR250 and buy those guards. |
YZ kick lever weighs less than OEM and offers a better kicking motion.
2003 YZ250 two stroke. Part # 5NX-15620-20 |
'01 front brake
2001 Honda CR 250 front master cyl and caliper rebuild kits fit my '01 XC 200.
RB |
All times are GMT -5. The time now is 07:23 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org