Radiator Braces
Hi everyone ! Well just ordered my self a 2019 ec300 , was just wondering what brand radiator braces you guys that have 18/19 bikes are using ? Cheers Tony
|
https://www.as3performance.co.uk/gas...guards-braces/
Fitted these.Not as sturdy as others but simple & allow the stock fins to be retained. |
I have the ptech braces. Seem to be good in all respects so far.. I also kept the standard fins in..
|
AXP. Similar to AS3 & P-Tech.
|
Bullet Proof Designs make the best guards I have ever used. Machined from billet and make the rads very solid indeed.
|
Enduro Engineering
|
I have P-Tech on my 18. Had to odify the stock fins to fit, but they are solid.
|
I just installed the AXP braces, I like their design and fitment was almost perfect. Only slight issue I had was one of the inner brackets was interfering with the upper radiator hose (the short one that goes through the frame and connects to the other side). So I had to ground that out a little on the bracket to provide clearance.
https://i.ibb.co/j3GBTMQ/IMG-6600.jpg https://i.ibb.co/86V7Whh/IMG-6601.jpg |
Well after much searching ,went with P-Tech , arrived in 12 days from Estonia fitted good time will tell if they are going to be good !
|
All times are GMT -5. The time now is 08:49 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org