Fitting map switch to 200?
Hi all, My cdi is in my airbox it has a black and an orange wire that are unplugged. How do people fit a switch to change maps? Also what map is it running with wires out? Steve
|
Unplugged is the soft map, if your able to solder wires together you can buy a switch and wire it up.
Otherwise I think you can buy a switch from GG which will plug in and work that way. |
Plug them together and try it before you wire a switch, the difference may not even be noticable on the 200 depending on the jetting and how you ride it. Even on the 250 its hard to tell.
|
do the black and orange wire allso apply to the ('00) EC300 CDI?
i would like it a litlle more smooth. i allready have the FWW. thanks guys, hannes. |
Quote:
|
I believe the dual map cdi was only introduced in 2005/2006
So no, unless you have a newer cdi you will not have a dual map. Sorry |
Correct, only some '05 and later bikes. What you can do is jet it a little different, and retard your static timing a bit.
|
My bike was in rain mode all along, as soon as the ice thaws Im back out!
|
All times are GMT -5. The time now is 07:23 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org