Chain guide - What type of plastic?
I'm refurbing my 2004 chain guide, the side cheeks are 3mm thick plastic.
Can any plastic experts suggest the best type of plastic to use? Obviously needs to be oil resistant and tough but not brittle. Would teflon/PTFE be suitable? Thanks, Dave. |
For anyone that's interested...
I've just spoken to a plastics supplier and explained what I wanted to use the plastic for. He said PTFE has a very low coefficient of friction but would be too soft, it wouldn't last long. He has recommended Nylon, it's cheaper too! :) Just ordered a small 3mm thick sheet for 3 euros. |
Thanks! I will need to do this in the near future on my 2000 EC.
|
2 Attachment(s)
Just to save any confusion...I'm refurbing the old style of 'swinging' chain guide...
Attachment 7782 Attachment 7783 |
Been many years but have used Celcon in the past for a lot of automated machine parts. I think it is a variation of Delrin. It was more dimensionally stable so it machined better than nylon or Delrin. Nylon is definitely low cost.
|
Those chain guides were very under rated. The rollers lasted for ever.
|
Quote:
|
1 Attachment(s)
Quote:
I was riding my Kawasaki KLX450R in the Dubai desert a few years ago, it had the solid mounted chain guide, as fitted to most of the latest MX/Enduro bikes... Attachment 7784 Whilst riding at speed, I hit a rock that smashed the chain guide and ripped it off the swinging arm, snapping the mounting lugs off the swinging arm. The chain was jammed and I couldn't release it. It was a very hot/humid walk back to the house so I could get my trailer to recover the bike. I found an aluminum welder who welded the lugs back onto the swinging arm and I got it all straightened out again without too much fuss. I do wonder... if I had this type of old GasGas 'swinging' chain guide, maybe the damage wouldn't have been so severe. At least maybe I could have limped the bike home? :confused: |
1 Attachment(s)
My 3mm nylon sheet arrived in the post today, from supplier in UK (3euros on eBay).
It looks/feels like the same material as the original. It's only a small piece but is enough to make 3 pairs of side plates, so will do me for a few years. :) Attachment 7794 I found some blocks of nylon in my garage which I can use to make the rollers. Already did this sometime ago and have been using them for a while now, they work great. |
Quote:
Minimal I know, but every of bit power to the wheel helps! :) |
All times are GMT -5. The time now is 12:57 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org