Congrats on getting it finished. :D I am sure you will have to do some carb tweaking and suspension clicker adjustments but I hope its close for you.
|
Quote:
|
There is no powervalve leak of any consequence in 92-96 .CR 250 s
While the engine is running 1 psi drop in 6 minutes is nothing.The engine is running at 1000 s of rotations per minute. Also the engine tolerances will tighten up once the bike gets up to temperature. The main consideration is for the valve assembly to be free of stiction. Rubber o-rings, seals-goop whatever=drag. |
Quote:
|
Original Startup
It took me a while to get caught up on some other things. Here is a video of the original start up after the build in September 2017. I have put about 20 hrs on her now without any problems. She is very SMOOTH and very FAST. She is probably the fastest 250 that I have ever rode. In straight line acceleration she is about as fast with a little less torque as my 2011 GasGas 300.
https://www.youtube.com/watch?v=j-pkG5liJ_8 |
Quote:
|
Quote:
|
All times are GMT -5. The time now is 08:47 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org