Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   General Discussions & Announcements (http://www.gasgasrider.org/forum/forumdisplay.php?f=7)
-   -   2012 XC300 Review Posted (http://www.gasgasrider.org/forum/showthread.php?t=12408)

Chilly 05-13-2012 01:01 PM

2012 XC300 Review Posted
 
Here it is. I am having loads of fun with this thing! There is lots to read in this post; ride impression, video and pics, so check it out.

http://www.enduro360.com/2012/05/13/...ce-first-test/

http://www.enduro360.com/wp-content/.../DSC_00361.jpg

desertgasser300 05-13-2012 02:16 PM

Enjoyed the write up and the video, but in the vid. the battery tray was removed. Isn't that part of the structural integrity of the subframe?

Jakobi 05-13-2012 02:22 PM

Welcome to the forum and big thanks for the review. Going to have a read now :D

john01 05-13-2012 07:10 PM

Thanks for posting up your review and welcome to the site.

Wimpy525 05-13-2012 07:44 PM

Intresting about the rebound adjustment its faces out instead of forward. Mine faces foward and it sucks to adjust.

Chilly 05-14-2012 08:22 AM

Somewhere my login info for the site got lost, so I had to re-register, now I look like a total noob.

Whimpy - not sure what your rebound reference is, can you explain?

About the battery box, good point, I had not thought about that. I will keep an eye on the subframe and see if I notice any issues.

Wimpy525 05-14-2012 11:05 AM

I probably got a early version of the Olins shock, I was lucky enough to get my 12 in Feb. The adjuster for the rebound adjustment faces foward not to the side like in the photo you have of the linkage. You have to get to the adjustment with a long alen wrench, between the two likages. Not the end of the world but not easy to get too.

twowheels 05-14-2012 01:14 PM

Quote:

Originally Posted by Chilly (Post 86545)
Somewhere my login info for the site got lost, so I had to re-register, now I look like a total noob.

Whimpy - not sure what your rebound reference is, can you explain?

About the battery box, good point, I had not thought about that. I will keep an eye on the subframe and see if I notice any issues.

The battery box also includes a hook for the seat and provides support for the seat base ...

The updated box uses hex stand-offs into studs on the subframe that make it much easier to reattach than the first iteration.

thumperrider1 05-14-2012 01:42 PM

Quote:

Originally Posted by twowheels (Post 86565)
The battery box also includes a hook for the seat and provides support for the seat base ...

The updated box uses hex stand-offs into studs on the subframe that make it much easier to reattach than the first iteration.

When did an update for the box go out? Would this be different than what came on my 300 that was one of the first in country?

mcnut 05-14-2012 02:21 PM

Quote:

Originally Posted by twowheels (Post 86565)
The updated box uses hex stand-offs into studs on the subframe that make it much easier to reattach than the first iteration.

'splain this to me Lucy. I'm kinda stooopid.

We have an issue with the battery box mount on ours.


All times are GMT -5. The time now is 08:14 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org