GasGas Riders Club Forum

GasGas Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Used Bikes (http://www.gasgasrider.org/forum/forumdisplay.php?f=57)
-   -   2007 ec300 (http://www.gasgasrider.org/forum/showthread.php?t=25417)

Kpo73188 11-20-2020 07:33 PM

2007 ec300
 
5 Attachment(s)
07 300 2 stroke. Looking to sell or trade for a 450r or trx250r atv. Engine has about 8 hrs on it. Crank was rebuilt by ken oconnor with a new pro x connecting rod. Top end was replaced with a s3 vertex piston kit. Water pump rebuilt with a new billet high flow impeller. Every bearing and seal in the engine was replaced. Has a s3 billet head with the high compression dome, also comes with 2 other domes. Vforce reeds.New radiators and hoses. Billet rad guards.RB designs carb mod. Steering damper.Scorpion skidplate,* rear rotor guard. LTR case saver and large powervalve cover .Front tire has about 8 hours, rear has about 4. Rear is a goldentyre gummy enduro tire. All the wheel bearings were replaced. New throttle cable. Tusk hand guards. Guts seat foam and gripper cover. Forks and shock were rebuilt about 10hrs on them. Hydraulic clutch,tusk kick start lever. Fmf gnarly pipe, pro circuit silencer,* pipe guard. Tm designs chain slider, brp chain guide, chain and both sprockets were also replaced. New levers, new grips, Ready to ride. 7.6 hrs on all new parts. Asking 3600. Located in Darlington md.
More Pictures are in the craigslist ad,
Gasgas ec300
https://baltimore.craigslist.org/snw...223927455.html

two4freedom 12-03-2020 01:41 AM

Sweet looking bike!

Kpo73188 12-04-2020 09:05 PM

Thank you


All times are GMT -5. The time now is 05:47 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org