Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Suspension (http://www.gasgasrider.org/forum/forumdisplay.php?f=16)
-   -   Marzocchi 48 - Bleeder Valve/Stock Screw (http://www.gasgasrider.org/forum/showthread.php?t=20912)

ben 02-11-2016 12:14 PM

Marzocchi 48 - Bleeder Valve/Stock Screw
 
Sending my suspension in and they want screws instead of bleeders installed so there arent any leeking issues during shipment. Anyone know what the stock length, diameter, pitch, etc is? I can take in the bleeder valve to the hardware store to get an idea of the width and thread pitch but not sure of the length.

Came off a 2012 XC 200r.

Thanks.

john r b 02-11-2016 03:08 PM

Not more than a 1/4''in length. thread 0.8

Anders 02-12-2016 03:43 PM

On my 15 the screws are M4x6

Sent fra min GT-I9295 via Tapatalk


All times are GMT -5. The time now is 06:43 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org