Trying to resolve a few things while I am waiting on parts to arrive.
I cleaned up the clutch and it doesn't look too bad now. It definitely needs new fibers because of spots of rust, even though the fibers, steels and springs were all well within spec, almost at the spec for new items. https://i.imgur.com/Z4YnaSfm.jpg https://i.imgur.com/ohkr3wam.jpg Here is the outer basket. https://i.imgur.com/uOSn4kim.jpg Reverse side of the outer basket. https://i.imgur.com/KfylBhRm.jpg https://i.imgur.com/kPXiGscm.jpg https://i.imgur.com/IB7LxO5m.jpg |
Pro Grip Rally Grips and Other Stuff
Still waiting on powdercoater and new parts, so I tried to finish up a few other things.
Cut the old scott gripe off the throttle. https://i.imgur.com/rMtaGzwm.jpg I disassembled the throttle and cleaned up the inside of the throttle tube with a dremel and a wire wheel. https://i.imgur.com/SeZlKQNm.jpg https://i.imgur.com/rC3H1i8m.jpg I ran a tap through the pro tapers so I can can mount hand guards. https://i.imgur.com/K49kae5m.jpg This is the throttle after cleanup ready for new Pro Grip Rally Grips to be mounted,glued and safety wired. https://i.imgur.com/A2NETpJm.jpg https://i.imgur.com/ttzIhO4m.jpg MSR Raptor Clutch lever. https://i.imgur.com/5vmk1s6m.jpg https://i.imgur.com/OLJD2Kym.jpg https://i.imgur.com/FIlkXzgm.jpg |
Finished throttle with new grip glued and safety wired with new assembly bolts.:D
https://i.imgur.com/FuaoRzVm.jpg Bars are ready to mount up. https://i.imgur.com/lrbi7xFm.jpg |
Mastercross Parts/Motos Italy-Watercooled RM 500
Just got these Oem nos radiator louvers yesterday. I have been looking for these everywhere. I found these in Italy of all places. His name is Tiziana and speaks ok English. I had my parts in 14 days. He has vintage works parts, he builds aluminum tanks and he has a bunch of bikes for sale.
Suzuki NOS Louvers https://i.imgur.com/rzbm7Vim.jpg Like this water cooled 1985 RM 500 https://i.imgur.com/02naW0x.jpg http://www.mastercross.net/index_eng.html Click the flag at the bottom and his page will load in English. |
EBC Grooved Brake Shoes have Arrived
I just contacted my powdercoater, he is a great guy and he is covered up with work so it will be two more weeks before he has my frame, engine, triples, hubs etc finished. I don't mind waiting because he does it the right way the first time.:D
I did receive some stuff that the average young rider has never seen. RM 250 EBC Grooved brake shoes! https://i.imgur.com/kP0eP36m.jpg https://i.imgur.com/ZB0QnQHm.jpg https://i.imgur.com/3L28OSjm.jpg The grooves are supposed to channel any water or debris out of the shoes. https://i.imgur.com/HtjSVTmm.jpg |
More Stuff
A few more items just arrived.:D:D:D:D
https://i.imgur.com/AEwMoA3m.jpg New front brake perch with shorty lever. I am gonna replace those phillips screws with allen bolts. https://i.imgur.com/YcNOrkim.jpg This is actually a Oem NOS KX stop switch, but it mounts right up with the RM harness. https://i.imgur.com/9B44IUtm.jpg Motion Pro front brake cable. https://i.imgur.com/ZZCvxCOm.jpg Motion Pro throttle cable. https://i.imgur.com/8E2XlPem.jpg |
That RM. I've watercooled a couple of aircooled bikes, but I haven't seen one direct drive off the flywheel before, except by belt. That's a lot cleaner than I would have expected.
|
Quote:
|
First Pictures From the Powdercoater!
|
Powder Coated Parts Should Arrive this Weekend
Here are some more photos from the powdercoater.
Barrel, engine case and clutch cover. https://i.imgur.com/X03ZIcZm.jpg Suspension Parts Triples and silencer https://i.imgur.com/P2j6pJIm.jpg Head, magnesium ignition cover and water pump cover. https://i.imgur.com/th1ueSvm.jpg Rear hub and magnesium backing plate. https://i.imgur.com/UvGF1nTm.jpg Swingarm and suspension linkage https://i.imgur.com/49LDl9nm.jpg |
All times are GMT -5. The time now is 08:53 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org