EC250 info?
Okay, I have asked this question on several threads and receive 0 responses so I think I need to ask it differently. I have a 1999 ec250 with a 4speed trans. It runs great and I am finally going to ride a lot this summer (maybe a harescramble or two). That means it will be more than due for a rebuild at the end of the year. I would like to obtain a manual before getting that involved however the earliest I can find is 2003. My question is does anyone know where I can find one or will the info from the 2003 suffice to complete a rebuild. This is far from my first offroad smoker so I am familiar with the process and could probably do it without the manual but I always like to be as informed as possible.
|
I also have a 99 EC200, olny have the owners manual. This link provides back to 2003, which should be about as close as your going to get. Have you tried Go.Fasters?
http://www.gasgas.com/end_manuals.htm |
The '03 manual is close enough. Just curious. Why do you think you need to rebuild the engine? Maybe you should do a compression test and see what's going on in there. Often times, folks rebuild their two strokes because they think they should. If you run 32:1 oil ratio, and don't let any dirt through the engine (fresh filter frequently, the three f's to live by), it should go 20000 miles easy.
|
Same here i have a 1998 EC250 and had to use the 2003 manual for info.
It is close enough though. Any other questions ask on this site. |
Thanks for the info. I have not tried gofasters. I guess I can live with the 2003
|
All times are GMT -5. The time now is 06:19 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org