Rieju & GasGas Legacy Riders Club Forum - Test speed sensor cable?

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)

- - Test speed sensor cable? (http://www.gasgasrider.org/forum/showthread.php?t=22555)

andper

04-05-2017 01:07 PM

Test speed sensor cable?

Is it possible to use an multimeter to function test The cable? The odo used to woke up when i rotated The front wheel but it doesnt anymore.

Any other ideas on what might be causing this?

Skickat från min SM-T580 via Tapatalk

swazi_matt

04-05-2017 03:33 PM

Odo battery dead?

Anders

04-06-2017 12:56 AM

Do you still have the bracket with the magnet on the front wheel? On my bike it went missing within the first couple of months.

Tafka

04-06-2017 01:15 AM

Quote:

Originally Posted by andper (Post 175895)

Use continuity function on the multimeter.
If you have 2 wire speed sensor then it's just usual reed switch. So it has just on-off state. If you bring magnet in front of the sensor and the multimeter starts to peeeeeeeep then the sensor is okay.

andper

04-06-2017 04:13 AM

Quote:

Originally Posted by swazi_matt (Post 175900)

Odo battery dead?

Just replaced it!

Quote:

Originally Posted by Anders (Post 175907)

Do you still have the bracket with the magnet on the front wheel? On my bike it went missing within the first couple of months.

Yepp, it is in place.

Quote:

Originally Posted by Tafka (Post 175908)

Will do.

All times are GMT -5. The time now is 10:01 AM.