Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Chassis & Body (http://www.gasgasrider.org/forum/forumdisplay.php?f=20)

- - 2013 EC300 Levers (http://www.gasgasrider.org/forum/showthread.php?t=15688)

wa_ndro

08-29-2013 02:59 AM

2013 EC300 Levers

Anyone know of any crossovers with other bikes when ordering new brake and clutch levers for the 2013 300's?

Simmo737

08-29-2013 05:17 AM

Quote:

Originally Posted by wa_ndro (Post 118354)

Anyone know of any crossovers with other bikes when ordering new brake and clutch levers for the 2013 300's?

Scottys in Melbourne usually have zeta bendy levers and standard cheap levers in stock and are awesome service wise, the ajp clutch doesn't seem to crossover to anything that I know of, I think a pre 2006 Honda brake side fits (crf 450/250RNOT X), but I'd take the brake lever to Honda with you to check.

Hope that helps!

StuJohnson

08-29-2013 06:28 AM

These clutch levers are AWESOME.

http://www.midwestme.com/pages/productinfo.html

wa_ndro

08-29-2013 09:37 PM

Thanks Simmo, just order some - $9 each - too easy. Might invest in some decent bark busters rather than bendy levers.

GasGas

08-29-2013 10:18 PM

I like the shorty GasGas trials lever for the clutch side. Short Honda on the brake side.

rgranger

08-30-2013 02:41 PM

Stu, I have been running a MM on my KTM for a while and really like it. But at the time they only had the clutch, may have to try it on the brake side....

StuJohnson

08-30-2013 05:22 PM

Quote:

Originally Posted by rgranger (Post 118412)

Stu, I have been running a MM on my KTM for a while and really like it. But at the time they only had the clutch, may have to try it on the brake side....

As far as I know I don't think they do. The brake one they do make is for a Brembo which is on the KTM's

All times are GMT -5. The time now is 01:09 PM.