Jetting for 2011 EC250 UK
 

Looking for a starting point for jetting on a 2011 ec250

38mm AS2 carb.

I'm unsure on current jetting specs.

Typical UK weather 6?c to 14?c. 0- 1000ft

Thanks in advance. Looking for needle recommendation. Tight wooded trails with the a few hillclimbs. Thanks

Hi Quigs,

have you had a look at the jetting thread? I am sure you will find useful information there as most members post their personal settings there.

Good Luck
Steve

Hi Steve.

I been having a good look through the jetting threads etc.

Looks like the NEDW suzuki needle could be a good starting point. Also recommended by jakobi.

Just checked my specs now and 're as follow.

PJ 40
AS 3/4 OUT
NEEDLE, N1EF 2ND CLIP
MJ 178

Someone just posted a similar question, see it here...

http://www.gasgasrider.org/forum/showthread.php?t=23784

Thanks Dave.

Ordered the NEDW now

Got the NEDW needle.

Thinking of starting at 42 pj, needle position 3, and a 178 mj

Sounds like a good starting place...hope it goes well. :)

If you find clip 3 too rich,clip 2 too thin...options...
Necw is same taper,same diam,half clip pos leaner
Necw#3 = Nedw#2.5
Was useful for the 200(Nech #3)but most 250s seem happy with Nedw#2

In addition to what barossi73 explained...

You might find these tables useful that relate to the Suzuki NE** needles:

Attachment 7989

Attachment 7990

Attachment 7991