Is this power valve lever plate wrong?
1 Attachment(s)
This is the power valve lever plate position when I took the right side cover plate off.
The bike is a 2011 250ec. I noticed on other posting that the linkage rod is in the low position at rest (PV closed). Mine is opposite:confused: Running bad also.....got a race this weekend so need to fix if wrong. Help :( |
Looks like it is stuck open to me.
|
Take the allen bolt off the bell crank and see if the actuator rod drops down.
If not, the power valve governer is stuck. |
All times are GMT -5. The time now is 03:40 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org