TSP head mod - 2018 EC250
After help from my buddy, Nate - a bike mechanic - I learned the slide was too high, giving a lean condition on closed throttle. After winding out the idle screw the bike is running perfectly.
Squish - 1.35mm. The bike is whisper quiet down low & so much smoother - it was already smooth as. Clean, strong power all the way through, no spooge. Brilliant. So happy this saga is over! Big thanks to Nate & Dave and Jason at TSP, Melbourne, Australia. |
1 Attachment(s)
Here?s the head.
|
Looking for a list of USA shops providing squish band service.
|
Quote:
|
Millennium.
|
Millenium http://www.mt-llc.com
Web site isn’t helpful. I sent an email. info@mt-llc.com Edit: I called and talked to a non-tech. Squish mod is $81. Waiting for details from the tech. Millennium Technologies LLC 1404 Pilgrim Road, Plymouth WI 53073 phone: (920) 893-5595 fax: (920) 893-4830 |
Quote:
|
I just put the RK Tek head on mine and it’s simply amazing. Bottom end is nuts and then it’s just a nice smooth pull all the way up through the RPM’s. Power was increased across the board. I dare say it is very “450ish”. If I had it to do over, I would just send my stock head to them and have it modified to accept one of their inserts. That service is only $125 vs $325 for the billet head like I have.https://uploads.tapatalk-cdn.com/201...3e91b06b7d.jpghttps://uploads.tapatalk-cdn.com/201...d0a7a08379.jpg
Sent from my iPhone using Tapatalk |
Very nice stuff!
|
Is there anything wrong with just going for the $150 rechambering?
Why is this better than the Millenium service? RK-Tek for Gas Gas: https://www.2strokeheads.com/index.p...formance-heads Quote:
Quote:
|
All times are GMT -5. The time now is 09:56 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org