GasGas Riders Club Forum

GasGas Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   General Discussions & Announcements (http://www.gasgasrider.org/forum/forumdisplay.php?f=7)
-   -   Brake bleeder screw (http://www.gasgasrider.org/forum/showthread.php?t=24565)

Cox76y 06-28-2019 05:47 AM

Brake bleeder screw
 
Just wondering if anyone would be able to tell me the size and pitch of the rear bleeder screw on the 2018 ec300. I'm looking at installing some Russell speed bleeders n would not have a clue as to the size. I'm guessing the front and the clutch would be the same size..
Thanks in advance..

Davehuge 06-28-2019 10:19 AM

Quote:

Originally Posted by Cox76y (Post 190752)
I'm looking at installing some Russell speed bleeders...

First time I've seen them, what a great idea. :)

Have you used them before?

All the best, Dave.

P.S. I suppose another way of doing it would be a rubber tube with a non return valve in it, at least it would save replacing all the bleed nipples.

gasgasman 06-28-2019 02:57 PM

Also, you need to wrap Teflon tape on the bleeder nipple threads.

Davehuge 06-28-2019 04:03 PM

Aha, good point. :)

Cox76y 06-29-2019 07:55 AM

No I haven't tried them before. I'll measure up mine when I get home and order a set. Will post results on here..
Cheers


All times are GMT -5. The time now is 02:49 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org