GasGas engine maintenance schedule...
Hi
At what hours do GasGas suggest to rebuild your engine? Presume different hours for rings and full top end . |
Depends on how you ride, if you dust your engine, drown your bike etc etc etc..
Some people swear by doing the piston and rings as a package every 60-70hrs. Others will do a set of rings around 50hrs, and then a full piston at 100hrs. There are pleanty who do 100hrs on a set of rings. I pulled down my 2010 at 65hrs for a fresh piston and rings. Below are pictures of what I found. http://i575.photobucket.com/albums/s...d/P1000231.jpg http://i575.photobucket.com/albums/s...d/P1000230.jpg http://i575.photobucket.com/albums/s...d/P1000229.jpg Make what you want of it. |
I don't even bother with rings. I do a full top end between 75-100 hrs mixed riding and racing on a 250, B level. Whenever I do mine the rings are well withen spec. Piston looks good too, its just the fatigue factor to consider. I know 300s that have gone years without being opened up. Just do compression checks, keep the filter clean, good oil in both mix and trans.
|
Mines a 200. Thought i should do rings at 25 and top at 50. Will do a full top at 50 plus to be safe. What about powervalve cleaning? When should that be done ?
|
Do it all at the same time, as long as you run good oil.
|
Quote:
|
All times are GMT -5. The time now is 02:19 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org