renthal double wall
 

So my six days came through wtih a set of these bars. don't know if I dig the bend but I'll give them a go. What are you guys using for barkbuster attachments that double wall part looks pretty fat. any other opinion on these bars

Enduro Engineering makes a bar clamp specifically for this bar, or you can use the Fastway / Bonz method of attaching to the center bar mount on the triple clamp.

I will trade you a set of the 06 bars with heated grips if you want to give them up.

We are using moose bark busters they offer them for the twinwalls, Trust me they are way to ridged in our neck of the woods, take the cross bar off and it helps.. Zero flex in them.

Ron I was wondering about that cross bar ... I'll run the moose BB
einstein ... I have several sets of 06 bars ... but If I don't dig the renthals I may take you up on that.

i called renthal and asked them about the cross bar and as long as there twinwalls they said they are more than strong enough. just not on a standard renthal bar

I didn't like the bend at all. I Couldn't find good setup anyway. I bought "orange bike" high model Twinwall and shortened it about 1/2 inch. (I had same bend but fatbar in my old -07)

what do you guys do with the little plastic "door" they have screwed to the bottom air box drain?? When I saw that I thought it would do a great job keeping water out and an even better job of keeping it in the air box. This was verified when I pulled the air filter out after washing my bike and saw a nice little puddle of water still in there. Do you leave it as is, stick something in there to wedge it open a bit so it will drain, or just remove it all together??

My plane-jane ec300 just has a square hole? But then I am blind even with the glasses :)