Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Suspension (http://www.gasgasrider.org/forum/forumdisplay.php?f=16)
-   -   What front shock on a 2010 ec250 2T?? (http://www.gasgasrider.org/forum/showthread.php?t=14299)

Scar13 02-18-2013 05:28 PM

What front shock on a 2010 ec250 2T??
 
Hi guys ,

What front shock Is on a2010 2t ec250 anodized Red ??? Also do I need anything special to change out the dust seals and fork sealswhich are leaking ???

Jakobi 02-18-2013 06:52 PM

They'll be 48mm Sachs forks.

Typical OC fork. Scary in them. You will need a 48mm seal driver to get the new seals in. The dust seals are TIGHT! you'll have fun getting them out.

ALSO! More than one of us on here has managed to cross thread the rebound clicker in the damper rod upon reassembly. Do a search for the correct method (basically take the clicker out of the cap first, thread it into the damper tube, then put the cap over the top).

KYB 48mm bushing and seal kit can be had for around $50 and includes everything that will fit perfectly! 09 CRF450R (from memory)

swazi_matt 02-18-2013 10:50 PM

Fit synergyseals and you will only need to do it once!

twowheels 02-18-2013 11:44 PM

Quote:

Originally Posted by swazi_matt (Post 104929)
Fit synergyseals and you will only need to do it once!

Only once, but hide the women, children, and small animals while you're at it!

I might be tempted to go with SKFs on the first go round. Bushings are notoriously sloppy feeling when the forks are fully extended (bike on a crate).
Use a heat gun to relieve the seal groove before attempting to pull the oil seals, and do be careful on the rebound adjuster/rod removal and re-installation.


All times are GMT -5. The time now is 05:52 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org