Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   General Discussions & Announcements (http://www.gasgasrider.org/forum/forumdisplay.php?f=7)
-   -   Seat options (http://www.gasgasrider.org/forum/showthread.php?t=14779)

rbm33 04-23-2013 01:39 PM

Seat options
 
i was wondering what options are out there for replacing the facotry seat on a 2011 model gasgas.

i would like to find something with a little more padding. are there any aftermarket companies out that are making replacement seats? if not, has anyone tried converting another seat foam over to fit a gasgas?

thanks in advance

jhendr3702 04-23-2013 01:56 PM

Quote:

Originally Posted by rbm33 (Post 109444)
i was wondering what options are out there for replacing the facotry seat on a 2011 model gasgas.

i would like to find something with a little more padding. are there any aftermarket companies out that are making replacement seats? if not, has anyone tried converting another seat foam over to fit a gasgas?

thanks in advance

i ordered the ee seat foam and cover monday... my butt hurts so bad on the 07 seat.. i have heard on good authority the 11 is as hard or harder..

GMP 04-23-2013 02:04 PM

'07 seat was very hard. '08 seat much better, for trail riding anyway. Should fit all through '11. '12 is hard too but very narrow with angled sides and is fine with me. Might be something to that shape?

rbm33 04-24-2013 06:49 AM

Quote:

Originally Posted by jhendr3702 (Post 109450)
i ordered the ee seat foam and cover monday... my butt hurts so bad on the 07 seat.. i have heard on good authority the 11 is as hard or harder..

im ordering one today!! iv got to do something soon, a two hour rae almost kills me! lol

did you order the tall seat or the standard height seat foam??

i was considering ordering the tall seat then shaving it down in the front a little.

one eyed dog 04-24-2013 07:22 AM

seat foam
 
On my 11 250R I replaced the factory foam with the "soft" foam from E.E. I did notice a difference right away. The fit was good!!

Maybe try a pair of cycling shorts too..??

jhendr3702 04-24-2013 08:40 AM

Quote:

Originally Posted by rbm33 (Post 109509)
im ordering one today!! iv got to do something soon, a two hour rae almost kills me! lol

did you order the tall seat or the standard height seat foam??

i was considering ordering the tall seat then shaving it down in the front a little.

i am short..5'6" so i ordered the standard foam.. and the last enduro i rode was brutal.. we rode about 50 miles last saturday and my butt was done..

andykr87 04-24-2013 08:41 AM

I have a guys tall seat w hard foam and its hard alright. I would go with a medium foam and tall seal if your taller than 5'10. I stand up alot so i dont mind the hard foam so much and i weight 280 so medium or soft i just sink into.

rbm33 04-24-2013 09:00 AM

im only 5'9" about 185 lbs, maybe i shoul djust stick with the EE soft foam at standard height.

i do wear biker shorts but i should probably get a new pair with more padding.

Rick 04-24-2013 09:59 AM

You might want to call Travis @ Motoseat : http://shop.motoseat.com/ he is now carring GasGas covers and also has foam.

Worth a shot!

Jakobi 04-24-2013 06:52 PM

I went from the stock 2010/2011 seat to a Gutz setup normal height, medium foam. In comparison I recall the gutz medium was a bit firmer than the stock foam. I can imagine a hard would be significantly harder. Soft should be nice.


All times are GMT -5. The time now is 08:24 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org