To all the gassers out there,
 

Well i built a couple of 300's over the winter and one i was real excited about,
I have put about 25 hrs on now and feel its time to share with some people who would appreciate it. So here is a completely restored 2011 with a 2003 ec 300 motor with the real old school counter balance installed in it !
It can be done and it is amazingly smooth ! check it out.

Nice work!! I've thought about it for my 2000/2011.
-What ignition did you use?
-Where did you source the CB parts?

Thanks!

Very nice!
Post a pic of the camaro when it's done ;)

Very nice! You should post a build thread on those bikes. I didn?t know the 2003 counter balanced motor would fit in a 2011 B frame and yes, post some photos of the camaro when it is done.:D

i used the 03 ignition . the counter balance shaft i found in P.A. and the gear from A.Z. .
took a long time to find them.

had to do some work on the case to fit the frame i think i have some pics of it .
ill try to post them in the morning,
oh and the car is a 67 firebird im documenting it .
i would like to start a vlog on it

Do you have a pic with the ignition cover off with ignition & CB installed?

i do ill have to get it off my phone .
i had to use the 2k2 because the other was to big then i put a flywheel weight on to compensate for the loss

i think i got the weight from check point

this is where i worked the case down to fit