Hi!
What you describe Glen is what I described. The guy who did it just didn't remember 100% if the right cable on the stator windings he disconnected was white or yelow. He remembers yelow. Unfortunatelly he didn't take pictures but his method works for many other HID applications on gas-gases in Finland. One other guy following his method he didn't find the extra free white wire behind the tank but still the power only from the yelow wire connected to the dc regulator was enough for a HID headlight. I believe him because I have been using for long time the headlight wires (powered only from the yelow wire) to power simultaneously two OSRAM IRC spots of 70W total (equal to 100W of normal spots) and they work great.
Still I am confused about the ac regulator. If the black wire is for ground and the yelow is connected to the free white wire of the bike then there isn't any wire to give power to the extra lamp i want to use. How should I do it?
Thank you,
Leon
|