Quote:
Originally Posted by Ignas
Carb is AS1 38mm, #7 slide without notch cut.
I also plan to ride in winter -5-20C. Do i need another needle for that or just main and pilot jets will do?
What float height should i make for my carb?
|
Hmm I can't help you out too much there as all my Gasser related jetting experience is using AS2 carb.
From memory most run the as1 float height at 16mm.
I'd get rid of the N1 needle and go to a JD blue needle or a G/H diameter needle of your choice (N3EG/H or NECG/H) as those carbs seem to like a richer needle diameter.
In terms of jets read up on the jetting database and see if you can find a close match.