Bearings required (to fit 20mm axles)
Front wheel, 2x 20x42x13 (60042RS), (this is supposed to be 20x42x14, but good luck finding that bearing, the centre spacer will be the same length, just the outer spacers +1mm).
Rear wheel 2x 20x47x14 (60042RS)
Cush drive 1x 25x62x17 (I'll keep this the same and make the spacer to fit)
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear
2016 RM-Z450
|