View Single Post
  #20  
Old 03-21-2008, 07:54 PM
mountain thumper's Avatar
mountain thumper mountain thumper is offline
Senior Member
 
Join Date: Mar 2008
Location: missoula mt
Posts: 333
Default

i have it now!
!!the front circuit must be closed before the rear can be!!
yellow is basic ground(explain later)
in the front under the number plate, there are: 2violet,,1yellow,1yellowgreen
violet/ yellow is the running light, violet/ yellow/grn is head.
in the rear there are 2 parts
first harness is white, yellow green, violet
white=brakelight, y/g = ground, violet=hot
the second part(which i chose to cut into, since its not part of the chassis harness) i found tied up in the airbox has 2 parts
1) brown/black, im not sure what this is, i didnt use it
2) 3 prong with green, black, and brown.
green= brake switch, black=ground, brown=taillight
i hope this is helpful, it took me a while to figure it all out, since all the schematics i can find are black and white+low res
__________________
Le Crutan
98 ec250 sixdays, doma, eline pipe guard, zokes shivers from a cr250,fredette racing chain slider, protaper withbarkbusters (SOLD)

FOR THE SECOND TIME 07 EC300 polisport headlight, acerbis taillight ltr pv cover and case saver,trailtech endurance,120z fww, g2 throttle,xr chain puck:
Reply With Quote