If it were me I would put a 180 main in it to start and then go from there.
Plug reads are very deceiving and not a very good way to jet a bike. It gives you an idea but you need to jet more based on performance than how the plug looks. Also making a jetting change and then riding up and down the street or some other no load situation is not a good way to jet. This is not how you normally ride therefore you shouldn't be jetting to those circumstances. I learned all this the hard way.
Also it will be next to impossible to get the jetting dialed in until you get your squish band corrected.
I learned all this the hard way. I chased jetting for months and never could get it right until I fixed the squish and went to a riding area and put my jets and tools in my pack and went for a ride. Had jetting sorted in less than 10 miles and haven't touched it since.
Sent from my iPhone using Tapatalk
|