Quote:
Originally Posted by billybob69
Thanks for the replies.
Can you explain what you mean by "non-supported" bikes now. Do you mean that the bikes are no longer made? But I'm assuming that you can still get parts for them? Engines, forks n shocks apart, the rest of the bike(s) look interchangeable with other GG 4s. Is that not the case?
|
Correct, none of these bikes are made now. But that shouldn't keep you off buying them (at least not the EC250F). While I don't know the Cami (I have never seen one here in my part of the world), the EC250F is, for all practical purposes, a standard Yamaha engine in a standard Gasgas chassis. Getting parts for either should be no problem. Gasgas did change some small details around the Yamaha engine (adding a hydraulic clutch and removing the dry sump oil tank), but that shouldn't make any problems parts-wise.
In your case, I would go with the 250F.
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|