With my jetting set how I like it for Sea Level to 3000 ft., changing for elevation has been very easy to ball park. This is how I will leave the house and then adjust as needed at the site.
For 3000-6000 ft
pilot - no change
main - down 1 size
For 6000-higher ft
pilot - down 1 size
main - down 2 sizes
(possible switch to different, leaner needle or clip position depending on conditions)
I not a huge rever, but I jet my bike to pull clean onto the pipe.
__________________
Mike Baxter
2005 GasGas EC300 (Ohlins front and rear)
2007 Yamaha FZ1
2003 Pampera 280(hers)
|