Quote:
Originally Posted by bvacher
Hi All,
Im stumped - need help. This is the problem:
After a recent rebuild - engine turns over on crank fine - see pic 1. All the gears turn - the crank gear the flywheel gear the clutch basket and the kickstart gears - all turn when I turn the engine,
Pic 2 - when I try the kick start its solid! When I slide the clutch basket off the kickstart and starter cog turn fine and return spring - everything. Then when the clutch basket goes back on - solid with the kickstart!
What is going on? Any help appreciated... Attachment 9130
Attachment 9131
|
JUST pulled mine apart 2 days ago, same thing. The shaft angles without the outer cover on and gear hits the clutch.. Put cover on and you will be fine. I was trying to determine a bearing noise and trying to turn with kickstartwe with clutch side all open and felt it jam